I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
Printable View
I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
who told you it would slow down your pc? as far as i know the only way adding a hard drive can slow down a pc is if the hard drive you are adding is slower then the other one and it is added to the same channel, but I dont think a 200 gig would be all that slow really (most likley 7200rpm) lolQuote:
Originally posted by ziggyjuarez@15 April 2004 - 22:13
I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
I wouldn't worry about it all that much
if your worried you can just add them on seperate channels anyway and they won't affect each other at all "one on sata the other on ide, or both on ide but on different channels"
it is not going to slow down your pc. if anything your older hard drive would be slowing down your big one.Quote:
Originally posted by ziggyjuarez@15 April 2004 - 21:13
I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
just make sure you have it set up like this on the ide cables:
primary ide channel:
master: old hard drive
slave: new hard drive
secondary ide channel:
any cd drives that youve got can go on the secondary ide channel in any order.
master: old hard drive
slave: new hard drive
Alright thanks.I think the person who told me that wanted my hard drive,I'll be sure to kick him :01:
:lol: u do that.Quote:
Originally posted by ziggyjuarez@15 April 2004 - 21:23
master: old hard drive
slave: new hard drive
Alright thanks.I think the person who told me that wanted my hard drive,I'll be sure to kick him :01:
:lol: u do that. [/b][/quote]Quote:
Originally posted by ROSSCO_2004+15 April 2004 - 22:34--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (ROSSCO_2004 @ 15 April 2004 - 22:34)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-ziggyjuarez@15 April 2004 - 21:23
master: old hard drive
slave: new hard drive
Alright thanks.I think the person who told me that wanted my hard drive,I'll be sure to kick him :01:
wow, rossco your reachin 2000 posts soon!!
and ziggyjuarez, give him a good boot
wow, rossco your reachin 2000 posts soon!!Quote:
Originally posted by kaiweiler+15 April 2004 - 21:38--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (kaiweiler @ 15 April 2004 - 21:38)</td></tr><tr><td id='QUOTE'>Quote:
Originally posted by ROSSCO_2004@15 April 2004 - 22:34
<!--QuoteBegin-ziggyjuarez
Quote:
@15 April 2004 - 21:23
master: old hard drive
slave: new hard drive
Alright thanks.I think the person who told me that wanted my hard drive,I'll be sure to kick him :01:
:lol: u do that.
and ziggyjuarez, give him a good boot [/b][/quote]
:o i just noticed i was that high! i got to 1000 just a month or two ago! time flies when ur, uhh, on a forum? lol
wow 2,000 get to spamin man.i hope i dont stay in here long enough to get 2,000 post
I have two hds(one 20gig & one 60gig) on my 2.4ghz Sony Vaio and initially the PC isn't slow but as both hds slowly become full there is a slight slowdown in accessing file and programs. I haven't seen any slowdown in start-up or shutdown, so I don't think you have to worry about it since your getting a 200gig hd.
defragment it ;)Quote:
Originally posted by dsa16@15 April 2004 - 22:22
I have two hds(one 20gig & one 60gig) on my 2.4ghz Sony Vaio and initially the PC isn't slow but as both hds slowly become full there is a slight slowdown in accessing file and programs. I haven't seen any slowdown in start-up or shutdown, so I don't think you have to worry about it since your getting a 200gig hd.
Just wondering does cache hurt ? So I have a 60GB 2MB cache THEN add a 120gb 8mb drive so its running or seeking at the lower speed?
Edit: Would I really notice the difference?
I'd have said that you should have your current hard drive on primary master, your new hard drive on secondary master and your optical drive on secondary slave
If you have another optical drive, I'd have had it on primary slave
Sorry 4 th Are you answering my Question?
So I would set the 8mb cache harddrive as master then?
No, sorry. I was answering the original question, because I didn't think Rosco's config was the best.Quote:
Originally posted by peat moss@16 April 2004 - 06:37
Sorry 4 th Are you answering my Question?
So I would set the 8mb cache harddrive as master then?
As to your question, yeah, there is a noticable difference between 2MB cache and 8MB cache, in my experience. If possible, you should put programs and games on the faster drive (i.e. the 8MB cache drive)
Thank you 4th :)
I don see how that config is better than mine. the new hard drive will be slowed down by the cdrom drive if its a lower ATA transfer rate (like say ata33 or ata66) and also if he does have 2 cd-rom drives then one of them would be hooked up with the old hard drive and be slowing it down too.Quote:
Originally posted by 4th gen@16 April 2004 - 02:33
I'd have said that you should have your current hard drive on primary master, your new hard drive on secondary master and your optical drive on secondary slave
If you have another optical drive, I'd have had it on primary slave
Wow...that's alot of disc storage, do you really need that much?Quote:
Originally posted by ziggyjuarez@15 April 2004 - 20:13
I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
I would think that your best layout would be to add a 20-40Gb SATA drive as your master ( if your board will support it) and use your bigger ( and slower) drive as storage.
Put your OS and and apps on the SATA and you'll get faster boot/access times, leaving the 147Gb(?) drive to store whatever it is you need but
don't access frequently.
At any rate DO NOT put a HDD and an optical drive on the same channel.
How often does the person use the cd drive?Quote:
Originally posted by ROSSCO_2004@16 April 2004 - 12:09
I don see how that config is better than mine. the new hard drive will be slowed down by the cdrom drive if its a lower ATA transfer rate (like say ata33 or ata66) and also if he does have 2 cd-rom drives then one of them would be hooked up with the old hard drive and be slowing it down too.
I don see how that config is better than mine. the new hard drive will be slowed down by the cdrom drive if its a lower ATA transfer rate (like say ata33 or ata66) and also if he does have 2 cd-rom drives then one of them would be hooked up with the old hard drive and be slowing it down too. [/b][/quote]Quote:
Originally posted by ROSSCO_2004+16 April 2004 - 13:09--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (ROSSCO_2004 @ 16 April 2004 - 13:09)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-4th gen@16 April 2004 - 02:33
I'd have said that you should have your current hard drive on primary master, your new hard drive on secondary master and your optical drive on secondary slave
If you have another optical drive, I'd have had it on primary slave
That is no longer true. It used to be true of early drives, but the later ATA specification has overcome this problem (unless you've got some VERY old optical drives).
The best config depends on how and where you are going to store data, and assuming you are burning cd's where the source is.
You will probably not be using cd's much of the time, so it is probably best to put the two hard drives as master on each IDE channel. Assuming you will be burning data from the second hard drive your cd burner (or the one you use most if you've got more than one) should be the slave drive on the primary IDE channel. Any other optical device can go as the slave on the secondary IDE channel.
Wow...that's alot of disc storage, do you really need that much?Quote:
Originally posted by clocker+16 April 2004 - 13:50--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (clocker @ 16 April 2004 - 13:50)</td></tr><tr><td id='QUOTE'><!--QuoteBegin-ziggyjuarez@15 April 2004 - 20:13
I'm thinking of adding another hard drive to my comp.The one i have now is 147GIG,but im thinking of adding another 200 gig drive but someone told me it can slow down your PC.If so what can i buy to stop this from happening
I would think that your best layout would be to add a 20-40Gb SATA drive as your master ( if your board will support it) and use your bigger ( and slower) drive as storage.
Put your OS and and apps on the SATA and you'll get faster boot/access times, leaving the 147Gb(?) drive to store whatever it is you need but
don't access frequently.
At any rate DO NOT put a HDD and an optical drive on the same channel.[/b][/quote]
yes i do.I D/l DVD's full CD's and um dont sell um :unsure: