Power calibration error? :blink: It used to work fine before. I've tried different songs at different speeds. Different programs too and they still dont work
http://img.photobucket.com/albums/v3...ave/nerrro.jpg :huh:
Printable View
Power calibration error? :blink: It used to work fine before. I've tried different songs at different speeds. Different programs too and they still dont work
http://img.photobucket.com/albums/v3...ave/nerrro.jpg :huh:
Try different media at slower speeds.
http://www.nero.com/en/632181809668074.html#23
http://www.gidforums.com/t-1805.html I didnt have the problem myself so I dont know if that will work.
Tru uninstall the cd burner in device manager then restart and let it reinstall.
edit: after searching google I see that it could be bad media, dirty lens, or in need of a firmware update.
Daft statement.Quote:
Originally Posted by TheRealDave
Everything that stops working properly has worked previously.
Like rossco_2004 said if you haven't upated fimware in awhile its a good idea anyhow...Also have a look at "nero info tool",ensure DMA is on for the drive(configuration tab in nero info tool) also check if the aspi layer is installed correctly...
how would i go about updating the firmware? would i go to the manufacturors (bad sp) site and download the correct one for device
yep that's exactly it trd.
Unlikely to be a firmware issue unless you've changed media type and the new media is not supported.
Have you just got some new media (even the same type)? If so, it could be that the power calibration track is missing/damaged. I've come across that before with cheap disks.
Look on the underside of the disk. In the middle of the disk, about 2mm inside the main burning area, there should be a track which just makes a single ring of the disk. If that track is missing or damaged (not circular) you will get power calibration errors.
Well it wasn't the disk as i managed to transfer the media to my laptop and burn it there. It also isn't the media or the speed because I have tried different ones and still get the problem. We had an electricion come around on friday, he turned the power off while my PC was on and that's the only thing that i think could have caused the error.
Ok, i just tried it for the crack and it seems to be working now :blink: Strange..
Maybe it was just a bit warm?