Printable View
When i try to start protowall, i get this error message, "Protowall.sys is not loaded. Install the driver, then reload this application." Does anyone know where i can get this neccessary driver , or if there are anyother solutions to overcome this problem, please ?
Q: I just installed protowall for the first time and after I ran it I got an error message stating "Protowall.sys not loaded"
1. shut down protowall
2. go into your Control Panel and double click Network Connections
3. right-click your Local Area Connection and choose Properties
4. select Protowall and choose Uninstall
5. now hit the Install button
6. Choose Service and hit Add
7. Select Have Disk
8. Now select Browse
9. Navigate to your Program Files > dudez > protowall > xp driver folder and select Protowall.inf and then press Open
10. Now you will have to press OK twice followed by Continue Anyway twice
I did that and it said, " the specified location does not contain information about your hardware, then i clicked ok, and when try to run protowall again i get the exact same error as before.
Protowall.sys is not installed / loaded
This is probably due to spaces in the directory names under the default install path.
C:\Program Files\Dudez\ProtoWall\xp_driver
'program files' has a space in it. They are working on resolving this but in the meantime you can fix it as follows:
make a directory at the root of c: called protowall
copy the contents of the previous install directory into it. (protowall.inf, protowall.sys etc..)
Unistall Protowall, go to program files/ and make sure the "dudez" folder does not exist.
Now, Install protowall again, but this time, do not install the XP Driver
Go to: http://www.bluetack.co.uk/pwhelp/
Click on "How to use Protowall"
Click on "Install the driver"
Follow those steps using the new location of the driver files... click "Continue Anyway" untill it stops doing it (it did it 4 times for me)
Reboot
Open Protowall, and it works...
Stolen from:
http://forums.afterdawn.com/thread_view.cfm/123765
hope u get it working
protowall 1.41 is the best in my books
Quote:
Originally Posted by skelley521
Opps sorry, i didnt select "Service" thats why it didnt work. But now protowall is able to start up. sorry for all the inconvenience :( .
Thanks skelley521 :D
So by the way, do i just let protowall run in the background, dont i have to update the ip block list, if i do, how ?
..
what?Quote:
If ur cpu goes to 100% when converting the list, turn ur pc off and turn it on and do it right away and it will run slowly but do it properly
conversion is known to use alot of CPU
just let it complete naturally
i used to use BLM with 256MB ram
it must of took 2hours to complete a (full) blocklist
so thank god u got 512MB mate
Your welcome Formula1, glad you got it sorted ;)
..