Printable View
I just recently bought a Seagate Baracude, 7200 160gb hdd. There was a message about it configuring it to be 137gb instead of 160gb. I was wondering why this would be. I have a 60gb as master and my new 137gb (160) is slave. I was wondering how I could get the other 20gb back. Is this because my computer cant handle 220gb?
Update your Windows with Service Pack 1 or Service Pack 2.
You will then see the whole drive. Btw, a 160 GB drive will show as 152,618 MB.
my windows is updated though.
Quote:
Originally Posted by maebach
Download Everest Home Edition which is free to use and is a great tool to check up on all your hardware inside your computer!. http://www.lavalys.com/products/over...?pid=1&lang=en
In the program especially check if 48 bit LBA(Logical Block Addressing) is supported under Storage>ATA
If not your motherboard does not support more then a maximum of 137GB so you need to look up if an update of your BIOS is available and hope that it will solve it. If not you need get a new PCI controller card and ATA cable and install your drive on that instead. Otherwise you will have to suffice with the 137GB. Also upgrade XP to SP2 and make sure to format it to NTFS!.
I just upgraded to SP2, It does support LBA 48 bit, and it's still at 137gb. I also updated my BIOS. It's NTFS too. I guess I'll try getting a new PCI controller and ATA cable.
Did you look in Everest Home to see if the motherboard supports 48 bit LBA??Quote:
Originally Posted by maebach
If so the problem might be that you created the partion before you upgraded to SP1 or newer?. If so you have to create an additional partion to use the extra space or extend the current partion by using Partition Magic.
As usual back up any important data before changing your partition!.
What motherboard is it?
Asus P4Pe, socket 478
What BIOS revision are you using?
The latest is 1007 available here: http://dlsvr01.asus.com/pub/ASUS/mb/...e/p4pe1007.zip
BIOS flash utility: http://dlsvr01.asus.com/pub/ASUS/mb/flash/aflash221.zip
Thanks, for your help. I solved it (with your help). I used PartitionMagic8.0 and found 21gb disabled. I created it and merged it with the 137. Thanks alot.
You have to download seagate disc wizard tool and install
http://www.seagate.com/support/disc/...s/discwiz.html
Not needed.Quote:
Originally Posted by dzr